Readers ask: Yamaha R1 2006 S V T Model How To Identify?

What model is a Yamaha R1?

The 1,000cc YZF-R1 supersport model debuted in 1997 at the Milan Motorcycle Show (also commonly known as EICMA). Featuring a dry weight rivalling that of 600cc machines at 177 kg and a powerful 150 PS 4-cylinder engine, the R1 took the motorcycle world by storm as a fun-to-ride litre bike made for carving corners.

How can you tell the difference between R1 and R1S?

Unlike the R1M and R1 that get titanium connecting rods, the R1S will have steel con rods. Various magnesium pieces in the R1M and R1 are replaced by aluminum on the R1S, while aluminum pieces on the R1M and R1 turn into steel for the R1S. The R1S does get a titanium muffler, however.

Where is the engine number on a Yamaha R1?

Two matching numbers on the crankcase halves: one on the upper case and one on the bottom case. These two matching numbers are located on the rear of the motor.

What is SCS on Yamaha R1?

Slide Control System (SCS) ‘limits sideways movement of the rear tyre’, again using the 6-axis box of tricks to function. Put simply, the TC controls the amount spin and the SCS controls slide, and in particular, how far you want the bike to step out.

You might be interested:  Quick Answer: How Much Is An Yamaha R1?

Is R1 faster than R6?

THe R1 has more, much more, power throughout the entire rev range. The R6 cant put you on your back in 1st or second gear by a mere twist of the throttle, the R1 can.

How fast is a R1 Yamaha?

Motorcycle Consumer News reported a tested top speed of 176.7 mph (284.4 km/h).

What size is an R1?

The Yamaha YZF R1 Dimensions 2055 mm in length, 690 mm in width and 1150 mm in height with a wheelbase of 1405 mm.

How much horsepower does a 2016 R1 have?

Sure it doesn’t rev as far as the standard model, nor does it produce its 164-plus horsepower figure, yet its power numbers ( 153 ponies at 11,800 rpm and 70 lb-ft at 8900 rpm) is nothing to scoff at.

How do you read a Yamaha engine number?

Locate the engine number. Yamaha engine numbers normally are located on the top of the crankcase, next to the clutch cover on the right side of the engine while sitting on the vehicle. Write this number down for referencing. According to Tangedal.

How do you read a motorcycle engine number?

Interpreting the Engine Serial Number

  1. Look at the first four digits before the E. These digits represent the motorcycle model number. The last character represents the year of the particular model.
  2. Read the seven digits after the dash. These digits convey information regarding the engine casing.

How do you tell the year from a Yamaha VIN?

How Do You Tell A Year From A Yamaha VIN? Look for the 10th character of your Yamaha VIN for finding the year of the model. If it lies between J to Y, the year would be 1998 to 2000 respectively. If it’s a digit, for instance, 2 will stand for the year 2002, 5 will stand for the year 2005, and so on.

You might be interested:  Often asked: How To Set The Clock On A 2004 Yamaha R1?

Does the 2020 R1 have a Quickshifter?

The 2020 Yamaha YZF-R1 and YZF-R1M return with: 10x traction control settings. 4x slide control. 4x wheelie control. 3x quickshifter (clutchless shifting)

What is slide control in bike?

Slide Control: How it works: Uses the same sensors in the traction control system, but adds in data from the IMU to detect sideways motion, and intervenes accordingly to control the slide without allowing the slide get too squirrely. With slide control, you can slide just like Casey Stoner!

Leave a Reply

Your email address will not be published. Required fields are marked *