Question: How Do I Know What Model My 2009 Yamaha R1 Is?

What model is a Yamaha R1?

The 1,000cc YZF-R1 supersport model debuted in 1997 at the Milan Motorcycle Show (also commonly known as EICMA). Featuring a dry weight rivalling that of 600cc machines at 177 kg and a powerful 150 PS 4-cylinder engine, the R1 took the motorcycle world by storm as a fun-to-ride litre bike made for carving corners.

How do I know what model Yamaha I have?

To find your Yamaha outboard’s year and model number, locate the identification plate or sticker on the transom mounting bracket. The ID plate/sticker should be somewhere above the waterline on either the port or starboard side of the bracket.

How do you decode a Yamaha VIN number?

How to Read a Yamaha VIN Number

  1. Locate the VIN on your Yamaha.
  2. Decode the meaning of your Yamaha motor vehicle VIN by breaking down the unique pattern of numbers and letters.
  3. Locate the third VIN digit.
  4. Notice VIN numbers four through eight.
  5. Observe the ninth figure on the VIN.
  6. Look at the 10th figure of the VIN.
You might be interested:  Question: How Much Did A 2006 Yamaha R1 Le Cost Sticker Price When New?

What is SCS on Yamaha R1?

Slide Control System (SCS) ‘limits sideways movement of the rear tyre’, again using the 6-axis box of tricks to function. Put simply, the TC controls the amount spin and the SCS controls slide, and in particular, how far you want the bike to step out.

Is R1 faster than R6?

THe R1 has more, much more, power throughout the entire rev range. The R6 cant put you on your back in 1st or second gear by a mere twist of the throttle, the R1 can.

How fast is a R1 Yamaha?

Motorcycle Consumer News reported a tested top speed of 176.7 mph (284.4 km/h).

How do you tell what year a pw50 is?

Therefore knowing what year PW you have can be difficult unless you know how to read the VIN number or have a title in hand. The VIN number on a PW-50 can be found on the frame’s down tube. If the VIN number starts with 4X4 your PW-50 is between 1981-1983 and more research will be needed.

How do I identify a Yamaha four wheeler?

Locate the VIN number on the frame of the ATV. This number is usually found near the front end of the vehicle on the left side under the shift lever. The title of the ATV will also have the VIN number on it. Check to make sure that the second letter of the VIN is a “Y”.

What year is Yamaha four wheeler?

Read the tenth digit. This digit represents the year that the ATV was made. For example, A=1980, B=1981, Y=2000, 1=2001, 9=2009 and A=2010. This letter or number can repeat (the “A,” for example), but the codes of the other digits in the VIN allow you to know in which year the ATV was made.

You might be interested:  FAQ: 2007 Yamaha R1 Losing Power To The Fuel Pump When Cranking?

How do you decode a VIN number?

How to decode a VIN?

  1. Digits 1 through 3 combined is the WMI, (World Manufacturer Identifier).
  2. Digits 4 through 8 represent the vehicle descriptor section.
  3. Digit 9 is a check digit.
  4. Digits 10 through 17 is the Vehicle Identifier Section.
  5. The 11th digit is the manufacturer’s plant code.

Can I check a VIN for free?

Here’s Where To Get a Completely Free VIN Check! You can get a free VIN check at the National Insurance Crime Bureau (NICB), VehicleHistory.com or iSeeCars.com/VIN. Just pop in your car’s digits and these sites will do the VIN lookup and give you information on the vehicle.

How do you read a VIN number on a Yamaha ATV?

ATV VINs are standardized for all manufacturers.

  1. Look at the first three digits of the VIN. The first digit represents the country in which the ATV was made.
  2. Read the fourth through eighth digits.
  3. Look at the ninth digit.
  4. Read the tenth digit.
  5. Look at the eleventh digit.
  6. Read the twelfth through seventeenth digits.

Does the 2020 R1 have a Quickshifter?

The 2020 Yamaha YZF-R1 and YZF-R1M return with: 10x traction control settings. 4x slide control. 4x wheelie control. 3x quickshifter (clutchless shifting)

What is slide control in bike?

Slide Control: How it works: Uses the same sensors in the traction control system, but adds in data from the IMU to detect sideways motion, and intervenes accordingly to control the slide without allowing the slide get too squirrely. With slide control, you can slide just like Casey Stoner!

Leave a Reply

Your email address will not be published. Required fields are marked *