Often asked: How To Adjust Yamaha R1 Clutch?

Does Yamaha R1 have slipper clutch?

Race proven slipper clutch for the 2015-2019 Yamaha R1. This clutch is complete with new springs, tuning parts, and a new pull lever for better modulation. Testing with pro level riders has shown that this clutch is good for at least 1/2 a second on a typical track.

Can you adjust a motorcycle clutch?

” Yes, you can adjust the free play – that will change where the clutch engages relatively to lever travel. “With the bike in neutral, pull the clutch lever toward the handlebar and let it go, pulling the clutch cable’s housing away from the barrel adjuster with your right hand as you release the lever.

How do I adjust my clutch?

To adjust, simply pull up on the clutch cable and loosen the locknut and the adjuster nut slightly. Next, slowly pull up on the clutch cable again. You will feel a point where the clutch fork engages. This is where the clutch cable should be adjusted to.

Why is my clutch so hard to pull?

There are several factors that can contribute to a stiff clutch. An old, worn or dirty clutch cable is one reason. Other factors include dirty lever, stiff clutch springs, dirty or worn actuator arm or push rod. Clutch position and hand strength can also be a factor.

How much is a clutch adjustment?

As mentioned, the average clutch replacement cost will be $1,200 to $1,400. Of this figure, the parts usually cost $700 to $750, with labor accounting for $500 to $650. Depending on where you live, however, the average clutch replacement cost may drop to closer to $800.

You might be interested:  Often asked: When Rebuilding Motor Yamaha R1 What Upgrades Power?

Can clutches be adjusted?

Over time the clutch wears down and requires adjustments. The clutch freeplay must checked and adjusted at every 6,000 miles or as specified in the maker’s service schedule. Newer vehicles use a hydraulic clutch and slave cylinder that are self adjusting and do not require adjustments.

Leave a Reply

Your email address will not be published. Required fields are marked *