FAQ: How To Change Oil In A 2009 Yamaha R1?

How do you change the oil on a Yamaha R1?

How to Change the Oil in a Yamaha YZF R1

  1. Position a drain pan under the engine and remove the oil filler cap from the right side of the crankcase.
  2. Remove the 8mm Allen drain bolt and crush washer from the bottom of the engine, and let the oil fully drain out.

What type of oil does a 2009 Yamaha R1 take?

YAMAHA Sport II Motorcycle AP SAE 10W40 Oil Change Kit 2007-2013 YZF-R1 / 2006-2013 YZF-R6 LUB-SPTCG-KT-15.

How much oil does a 2000 R1 take?

The R1 will use just under 4 quarts of oil, so don’t overfill. Wipe up any spills and start up the bike.

What oil does a 2008 Yamaha R1 take?

2007-2008 Yamaha R1 4th Gen specification. Yamaha recommends using their own motor oil, which is affordable and good. Yamalube 10W-50 covers a huge range of operating temperatures, from below freezing to above 100 degrees F / 40 degrees C. Replace every 2nd oil change.

You might be interested:  Often asked: How Fast Does A Yamaha R1 Go?

What type of oil does a 2003 Yamaha R1 take?

10w-40. Amsoil is what I use.

What oil does a 2005 Yamaha R1 take?

AMSOIL synthetic lubricants are the solution for riders who want the most from their 2005 Yamaha YZF-R1. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days.

How much oil does a 1999 R1 take?

Officially it’s 3.2 liters, but just drain it, remove the filter and let it drain some more. Put the plug in and install a new filter and fill it with ~ 2.9 liters. Start it and let it get to operating temp. Let it cool.

How do you check the oil on a 2020 R1?

Turn bike off, wait a few minutes, and check oil. Should be in top half between two lines on sight glass with bike straight up, and level on both wheels. (not on side stand) If rear is on stand, the bike will pitch forward, and it will show less oil in sight glass than is actually in the bike.

What kind of oil does a 2000 Yamaha R1 take?

AMSOIL synthetic lubricants are the solution for riders who want the most from their 2000 Yamaha YZF-R1. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days.

How much horsepower does a 2016 R1 have?

Sure it doesn’t rev as far as the standard model, nor does it produce its 164-plus horsepower figure, yet its power numbers ( 153 ponies at 11,800 rpm and 70 lb-ft at 8900 rpm) is nothing to scoff at.

You might be interested:  Question: What Is The Normal Operating Temp For A 1999 Yamaha Yzf R1?

How much horsepower does a 2015 R1 have?

The 2015 R1 continues that smash mouth tradition, thanks to a 998cc inline four-cylinder engine that pumps out an incredible 200 horsepower and 83 pound-feet of torque.

How much does a 2016 r6 weight?

Ground clearance: 5.1 inches. Fuel capacity: 4.5 gallons. EPA estimated fuel economy: 40 mpg. Wet weight: 417 pounds.

Leave a Reply

Your email address will not be published. Required fields are marked *