Often asked: How To Adjust Shocks On A 1998 Flh Harley Davidson?

What does Harley FLH stand for?

FLH= electra glides rubber mount motors ( ultra,classic,standard,streetglide,roadkigs.roadgl ides) FXSTS= FX softail standard. FLHTC= electra glide classic.

What is the correct tire pressure for a Harley Davidson?

But before you take your bike out of the garage for the first time, make sure that you check your tire pressures and adjust if required. Most Harley-DavidsonĀ® motorcycles are equipped with DunlopĀ® tires; the tire pressures (cold) should be 36psi front and 40psi rear.

Can Harley Air Shocks be rebuilt?

Harley OEM shocks are rebuildable. The same shocks have been used on Goldwings for years. Rebuild kits are available at (gasp) Honda dealerships.same guts and there’s videos on YouTube of how to rebuild them

How do you adjust shocks on Hagon?

turning the bottom ring clockwise to the bottom of the shock will raise it, counter clockwise will lower it. I hope you didnt throw the tool away with the box With the adjuster at the bottom, hook the C spanner onto it from the right and pull it towards you.

You might be interested:  Question: What Is Size And Thread Pitch For Harley Davidson Exhaust Flange Huts?

How do you adjust the preload on rear shocks on a motorcycle?

Rear shock preload To adjust the preload on your bike’s rear shock, you will need a C-spanner to loosen the top locking ring and spin it up the shock to gain access to the adjuster ring. If you want to increase preload so the spring has less travel and to make the bike feel stiffer, turn the adjuster ring clockwise.

How do I make my rear shocks stiffer?

One can get oil-based shock absorbers filled with higher viscosity oil (thick oil) that make the ride quite stiff. Or you could get new gas filled shock absorbers that also provide a slightly stiffer ride. There are race / rally based shock absorbing systems that will make the ride stiffer as well.

What Harley models are FLH?

The Harley-Davidson FLH model has had three major incarnations, the Hydra-Glide, Duo-Glide and Electra-Glide.

What does Dyna mean for Harley?

1. The name has real meaning. Harley Davidson doesn’t just choose random names for their new models out of the air. There is always a value to the name and an important meaning. The word Dyna means power.

What PSI should rear shocks be?

The proper pressure of an air shock should be between 35 and 75 PSI.

Do Harley air shocks have oil in them?

Owners are removing the oil from their rear air shocks and replacing that oil with a 10 weight belray or equivalent oil. The oil added is 10 ounces, no more. The end result from those that have done this is a far smother ride with less air pressure. There is no bottoming out with this heavier oil.

You might be interested:  Quick Answer: When Did The Harley Davidson Brothers Die?

How much air do I put in my air shocks?

The proper pressure of an air shock should be between 35 and 75 PSI. If it is any lower than this, the shocks will need to be filled with air.

Leave a Reply

Your email address will not be published. Required fields are marked *